Operation steps of automatic flexo printing slotting die cutting machine:

1. Turn on the power: According to the instructions in the device manual, correctly connect the power to ensure that the device starts normally.

2. Set printing parameters: Based on actual needs, set the printing speed, printing pressure, paper conveying speed, and other parameters of the printing machine through the cardboard printing die cutting slotting machine control panel or computer software.

3. Placement of paper: Place the printing material into the feeding port of the cardboard printing machine to ensure accurate and flat placement of the paper.

4. Ink coating: Start the device, the ink coating system will evenly coat the ink on the glue, and then transfer the ink to the paper.

5. Printing: Start the printing machine, and when the paper passes through the printing area, the ink will transfer to the paper, forming a printed pattern.

6. Check the printing effect: After printing is completed, check whether the clarity, color, position, etc. of the printed pattern meet the requirements. If there are any problems, adjust the equipment or replace the ink in a timely manner.

7. Shutdown: After completing the printing task, turn off the power to ensure safe shutdown of the equipment.

By following the above steps, we can ensure the safe, efficient, and stable operation of the 4 color flexo printer slotter die cutter machine , improve printing quality, and meet customer needs.