Before application, the condition of each component of the automatic paper tube making machine should be carefully checked, such as the condition of electrical equipment, switches, insulation of electrical circuits, whether screws and nuts are fixed, and whether the protector is safe. After adding some lubricant, run the vehicle empty for 1-2 minutes, and the equipment can be used normally.

sprial paper tube making machine inspection:

1. For safe use, it is necessary to cut off the power transformer of the paper tube machine and maintain the machine/equipment for repair. Detect the brightness and damage of power transformers.

2. Please follow the safety signs. Security labels are important. During the long-term cleaning process, it will not be covered or dispersed.

3. When using paper tube tools, do not touch the moving parts with your fingers. One time can keep you in working condition during use, avoiding unexpected situations.

4. Check the gearbox to see if the air circuit wiring is correct.

5. Check if the electrical control system inside the paper tube is functioning properly. Set the temperature and stop heating the sealing device.

When cutting, be sure not to exceed the cutting height of 125 millimeters, and use a sloping iron to fix it according to the size. Only cut the paper, not other layouts. Do not place your hands under the pressure iron and blade to prevent scratches. When grinding the edge machine, make sure that the clothes do not get stuck on the feed shaft. When adjusting the CNC paper tube core making machine, pay attention to the sanding wheel brush. Both methods need to be coordinated with each other.

If you are also interested in this machine,please don’t hesitate to contact us:

Overseas manager: Tom Wang

Email:cartonmachine.tomwang@aliyun.com

Phone/Wechat/Whatsapp:+86 13303078975