The maintenance of ink sewage treatment equipment should take targeted measures based on the equipment type, environmental characteristics, and operating status.

1、 Core equipment maintenance

Blower fan

Regularly clean the intake filter to prevent impurities from damaging the impeller; Check the lubricating oil system to avoid overheating caused by poor lubrication.

Adopting frequency conversion speed regulation technology, combined with dynamic adjustment of air volume by dissolved oxygen meter, to save energy and reduce consumption.

Lift the water pump

Strengthen the slag removal effect of the grille to prevent fibers and plastic bags from entangling the impeller; Regularly check the mechanical seal and insulation performance.

Multiple gradient configurations of water pumps, combined with fixed speed pumps and variable speed pumps to adapt to flow fluctuations.

Grille machine

Regularly lubricate the bearings to prevent jamming; Promptly clean the blockage of the grid bars to avoid abnormal flow velocity through the grid.

2、 Environmental adaptability maintenance of

Anti corrosion and moisture-proof: The casing is coated with anti rust or corrosion-resistant cast iron, the motor waterproof grade is ≥ IP54, and the junction box is sealed with a rubber ring.

Winter temperature control: Adopt insulation measures for biochemical treatment equipment, such as covering insulation layers or heating devices.

3、 Management measures of the waste water treatment clear machine

Planned maintenance: Develop maintenance plans based on equipment records, clarify responsible persons and supervision mechanisms.

Fault diagnosis: Use vibration analysis, oil detection and other technologies to predict faults, reserve vulnerable parts and shorten downtime.

Cost control: Adopting a segmented water price settlement scheme to balance maintenance costs and operational efficiency.

4、 Classification maintenance strategy

Overhaul: Disassemble the equipment as a whole, repair the reference parts, and replace worn parts according to the manufacturer’s recommended cycle.

Medium repair: Partial disassembly, replacement of major components, and response to major malfunctions.

Minor repair: Repair or replace faulty parts during daily inspections to restore equipment functionality.

Through the above measures, the failure rate can be effectively reduced, the equipment life can be extended, and the stable operation of the ink sewage treatment equipment can be ensured.

If you are also interested in this machine,please don’t hesitate to contact us:

Overseas manager: Tom Wang

Email:cartonmachine.tomwang@aliyun.com

Phone/Wechat/Whatsapp:+86 13303078975